Back to Forums
[3] Wed 29th 02:29pm 32mm venturies for 40DCNF
(Mark Scholz (Portland, Oregon))
[4] Thu 23rd 08:56am 2005 SCCA Rulebooks online
(George Emery (Oregon))
[7] Mon 20th 02:41pm Piston mfg comparison
(Mark Scholz (Portland, Oregon))
[2] Mon 20th 09:32am Can't believe the NY Times said this...
(mark oliverio)
[2] Sun 19th 09:07pm CHECK RUNOFFS ON 12/25/04
(DAVE SNOW)
[23] Thu 16th 11:29am Dyno evaluation request
(Mark Scholz (Portland, Oregon))
[1] Mon 13th 12:48pm Single-carb 124 Production Class Questions
(George Emery (Oregon))
[12] Sun 12th 06:34am Speedchannel alert: 2:00PM EST SCCA Runoffs G-Prod
(RacerRuss)
[2] Sat 11th 01:32am Paging Steve H....
(Marc Frost)
[1] Thu 9th 09:30pm Upcoming Speedvision historic racing alert
(fiatcrazy in Eureka,,Ca.)
[1] Mon 6th 01:53pm Performance Parts for 2.0L (Volumex)
(Stanislaus76)
[1] Tue 30th 06:53pm Lancia Beta Limited Slip Diffs -- Anyone
(Sterling)
[4] Tue 30th 09:00am Removing under seat brace on spider?
(Carl....in Virginia)
[10] Mon 22nd 02:21pm Sorta race related...
(ChrisLayton(Memphis,Tennessee))
[6] Sat 20th 08:59pm Speedchannel alert: SCCA Runoffs HP Sunday 1:00PM
(RacerRuss)
[7] Sat 20th 08:51pm Exh System Optimum Size, II (atmo, street)
(RacerRuss)
[9] Fri 19th 05:41am Exhaust System Optimum Size
(Jim Fierst)
[2] Sun 14th 03:10pm newbie questions on upgrading performance
(Ed Noval)
[34] Sat 13th 05:22pm Progress on my X1/9 twin cam project ...
(RacerRuss)
[4] Wed 10th 08:53pm looking for more info regarding Filipinettis X1/9
(Alberto)
[6] Tue 9th 09:22am On an x-1/9 (strut top mounts)?
(Kevin B (Asheville, NC))
[3] Mon 8th 07:25pm scca solo II rules ?
(BILL DISCHER)
[1] Mon 8th 06:31pm Has anyone ever run across Delong camshafts for SOHC?
(Mark Plaia (Santa Cruz, CA))
[13] Fri 5th 03:33pm header temperature ?
(Allen & Lynette Lofland Wichita KS USA)
[6] Fri 5th 09:35am Gateway SCCA Race in St. Louis, MO
(Ken (Just a byte N of St. Louis))
[1] Mon 1st 09:26am Alternative Rod Bolt?
(Jim Scurria (Norfolk. VA))
[5] Sun 31st 06:19pm classification question
(David McDaniel)
[1] Thu 28th 06:14pm MS EFI help please,,,,,
(Jonny Pruitt)
[1] Thu 28th 05:22pm Need MS help,,,,,
(Jonny Pruitt)
[8] Wed 27th 01:20pm spider vs x19 handling
(R.Bitti)
[8] Thu 21st 04:36pm Need help, valves hitting oistons
(Mike Scafide (Pompano Beach, FL))
[1] Thu 21st 12:01am Any info about "Valtellina Racing Formigine(modena)"
(Alberto)
[2] Wed 20th 05:48pm Interesting very early X racer found in PR...
(Christopher Judd)
[1] Wed 20th 01:06pm Jim Scurria --- paging Jim Scurria... hello?
(Matt Webb)
[5] Wed 20th 11:02am Tires, Cantilever vs Others.
(Eric Armstrong)
[5] Wed 20th 07:23am Looking for feedback on Phantom Grip LSD
(Angelo Savosardaro)
[18] Mon 18th 07:59pm Autocross Performance Struts
(Steve Hayward)
[3] Mon 18th 01:49pm Maintaining Hub Centricity Question
(Jim Fierst)
[6] Mon 18th 10:40am FI Throttle Bodies
(Eric Armstrong)
[2] Tue 12th 07:42pm Anyone tried running an X in SM2?
(mark oliverio)
[2] Tue 12th 09:31am King again! At least in Oregon!!!
(Eric Armstrong)
[2] Sat 9th 10:41am Rebuilding 40IDFs.....
(ALEX SEPULVEDA)
[4] Fri 8th 10:03pm Easiest way to raise X1/9 high enough to re-install engine?
(mark oliverio)
[1] Fri 8th 06:59pm Rebuilding 40IDFs.....
(ALEX SEPULVEDA)
[9] Wed 6th 08:56pm Some Gearbox Advice, Please
(Jerry Boone)
[3] Mon 4th 07:33am MSH and Alfa Club Track Day
(Mark Scholz (Portland, Oregon))
[1] Sun 3rd 09:32pm X1/9 Racers at the SCCA Runoffs
(Paul Stoltze)
[2] Sun 3rd 08:18pm Fall Enduro in Medford
(Andy Jossy (Medford, Oregon))
[4] Thu 30th 10:43am 16V cylinderhead for sale
(Marko)
[5] Mon 27th 09:09am SCCA Runoffs - GP Race Report
(Paul Stoltze)
[6] Mon 27th 07:42am H-Production Runoffs Race Report
(Matt Brannon)
[3] Sun 26th 08:14pm Callins All Tranny Experts (that means you, Steve H!)
(Marc Frost)
[1] Sun 26th 06:28pm Mounting Kirkley Racing Seat
(John Whitney)
[9] Fri 24th 07:04pm extreme X body roll
(mike adams)
[10] Thu 23rd 03:29pm Woo hoo! Stolzespeed top 10 after Thurs Qual
(RacerRuss)
[3] Wed 22nd 12:54pm Mark Scholz, I heard you had a TTOD!
(Eric Armstrong)
[4] Mon 20th 01:52pm Runoffs Report Lancia Sorpion - Cutting Edge Developements..
(Sterling)
[5] Mon 20th 08:31am SCCA Runoffs live timing on the web
(RacerRuss)
[3] Fri 17th 06:46am Preliminary Koni Settings Question.
(Jim Fierst)
[4] Thu 16th 08:27pm Lancia Scorpion Crossmember
(Sterling)
[2] Wed 15th 08:41am Nationals is tough (D Prepared autox content)
(George Emery (Oregon))
[8] Mon 13th 02:25pm No sure exactly what happened to this Fiat race car ...
(RacerRuss)
[2] Mon 13th 07:44am Busy Week This Week: Final prep for Runoffs!
(Matt Brannon)
[9] Tue 7th 12:34pm Anyone heard of a Sceptre sports racer?
(John Allen)
[3] Mon 6th 05:49pm Atlanta Motor Speedway race report (nfc)
(RacerRuss)
[1] Mon 6th 04:29pm Another Busy Day Today...
(Steve Hoelscher (Huntsville, Alabama))
[14] Sat 28th 04:00pm Busy Day Today
(Steve Hoelscher (Huntsville, Alabama))
[7] Tue 24th 07:51pm "Shuddering" Tranny question
(Marc Frost)
[1] Tue 24th 06:39pm Can anyone help a buddy out?
(Scott_matre)
[3] Mon 23rd 04:33pm Calmap Accel Gen DFi Help
(fred pinczuk)
[2] Mon 23rd 07:35am Trivia question: How do you get..................
("Backup" Jim)
[3] Sun 22nd 07:45pm Rollcage tubing size
(John Whitney)
[9] Sun 22nd 06:27pm X1/9 Oil Filter choices (prefer shorter)
(RacerRuss)
[2] Sat 21st 05:15pm What Brake Upgrades Are Allowed InSCCA/?Other Raacing??
(Jim Fierst)
[2] Sat 21st 01:28pm Mid Ohio Video
(Sterling)
[9] Sat 21st 08:35am Racing/ Hi-Performancr FI Engine Question
(Jim Fierst)
[9] Thu 19th 03:01pm How light? Should we have a contest? :-)
(George Emery (Oregon))
[10] Wed 18th 03:08pm Any 850 racecars still around?
(Jerry Boone)
[4] Tue 17th 12:52pm Anyone know a "John Allen" who rallied a Scorpion?
(John Allen)
[6] Tue 17th 12:15pm 131 in SCCA Valvoline Runoffs!?!
(George Emery (Oregon))
[5] Sun 15th 02:37pm Matt Brannon WINS HP at Mid Ohio
(Sterling)
[1] Fri 13th 08:13am good luck this weekend Matt
(John Allen)
[6] Wed 11th 01:06pm Bible Creek Hillclimb
(Eric Armstrong)
[13] Sun 8th 06:11pm competitive Fiats
(R.Bitti)
[4] Fri 6th 01:34pm Autosprint head?
(Craig Steel)
[7] Thu 29th 08:26pm It's aaaahlive! #22 HP with Fuel Injection!
(Matt Brannon)
[2] Thu 29th 08:11pm Got Grip ???
(BILL DISCHER)
[4] Wed 28th 03:14pm Watkins Glen - Race Report
(Jim Scurria (Norfolk. VA))
[13] Wed 28th 08:12am Brake Upgrade .. What To Do ???
(Jim Fierst)
[1] Wed 28th 05:08am FFO Autocross pics
(Kevin B (Asheville, NC))
[1] Tue 27th 06:55pm bare 1500cc SOHC cyc. head
(ron norton)
[1] Tue 27th 06:52pm 600D and 600 trans. for sale
(ron norton)
[10] Sun 25th 08:18pm Vintage Race Report- Blackhawk Farms June 18-20
(Marc Frost)
[3] Sun 25th 04:49am Fo '04 Auto x report anyone???
(Jon Ranney)
[3] Sat 24th 02:37pm I'm selling a new IAP header on ebay
(RacerRuss)
[4] Thu 22nd 12:18pm FIAT 16-VALVE
(Neal Ryan)
[1] Wed 21st 02:59pm calling Jeff Stich please check email
(BILL DISCHER)
[6] Thu 15th 05:49pm Ball joints for my racer
(BILL DISCHER)
[5] Mon 12th 04:07pm Race report (Barber Motorsports Park)
(RacerRuss)
[5] Mon 12th 02:31pm Need help with Wiring an MSD6AL into a X1/9
(iambhooper)
[5] Sun 11th 10:06pm Flaming Geyser RallyCross
(Matt Brewster)
[1] Fri 9th 06:42pm X-19 1500 shell for sale
(ron norton)
[4] Thu 8th 04:21pm Fast lap of Beaver Run Video
(SterlingS)
[4] Wed 7th 08:26pm Race Report: Indy Grand Prix SCCA National (w/video!)
(Matt Brannon)
[3] Sat 3rd 05:42pm Lighted flywheel
(John Whitney)
[4] Thu 1st 03:37pm Beaver Run Race Video
(SterlingS)
[17] Wed 30th 09:55pm ReInventing Prepared (from the June issue of NAP)
(Steve Hoelscher (Huntsville, Alabama))
[3] Tue 29th 08:39pm Pylon Column
(Steve Hoelscher (Huntsville, Alabama))
[11] Tue 29th 10:37am Summit Point Race Report
(Jim Scurria (Norfolk. VA))
[2] Sun 27th 05:24am Another Koni question: What does "Special D" mean?
(Ulix Goettsch (Stuttgart, Germany))
[4] Sat 26th 12:47pm Koni adjustment question
(Ulix Goettsch (Stuttgart, Germany))
[10] Sat 26th 12:25am FIAT 131 ABARTH RALLY
(Bill)
[8] Fri 25th 12:43pm Uno Turbo Flywheel info...
(Eric Armstrong)
[2] Thu 24th 07:50am Summit Point this weekend
(Jim Scurria (Norfolk. VA))
[2] Tue 22nd 03:37pm RACE REPORT: BeaveRun SCCA National (June 19/20)
(Matt Brannon)
[19] Sun 20th 07:50pm FFO, autocross, my engine project,upcoming race at Barber ..
(RacerRuss)
[2] Thu 17th 06:00am Will be at BeaveRun in western PA this weekend...
(Matt Brannon)
[2] Wed 16th 10:54pm Work on the X19 race car is continuing.
(Steve Cecchele)
[9] Wed 16th 01:08pm Battery Recommendations
(Paul Irving)
[6] Tue 15th 09:34am Watkins Glen
(Jim Scurria (Norfolk. VA))
[3] Fri 11th 08:42pm help wit adjustable cam pulley (SOHC)
(Andy Jossy (Medford, Oregon))
[7] Fri 11th 04:09pm What is the stock wheel offset for an X?
(Dean Rees)
[4] Thu 10th 10:59am Positive remarks about Apple Motors
(Matt Brannon)
[4] Wed 9th 07:11pm Mid Ohio SCCA Natioinal 06/06/04
(Matt Brannon)
[22] Wed 2nd 04:51am '87 x tranny
(Jon Ranney)
[8] Fri 28th 01:26pm Which class features the fastest X's?
(yakima dave)
[11] Sun 23rd 08:00pm Thermostat poll
(Marc Frost)
[3] Fri 21st 10:36pm Great Fiat vs. Triumph Oregon Shootout
(Aaron Johnson)
[8] Thu 20th 11:18am New cool toy...
(Eric Armstrong)
[5] Thu 20th 03:54am ITC X1/9 Engine build up,questions.
(iambhooper)
[5] Tue 18th 06:09pm Engine build - help w/rings needed
(Scott Phelps)
[7] Tue 18th 09:34am By the way, we have lurkers... (Marc Johnson!)
(Eric Armstrong)
[4] Tue 18th 09:26am High Speed Stability - Autocross
(Eric Armstrong)
[5] Tue 18th 09:23am Autocross Race Report - North of the border...
(Eric Armstrong)
[6] Tue 18th 08:03am Can I use an adj. cam wheel for a Spider on an X1/9?
(Ulix Goettsch (Stuttgart, Germany))
[2] Mon 17th 02:17pm Front and Rear Tire Size Differences
(Jim Fierst)
[2] Mon 17th 12:29pm Stainless steel lines
(John Whitney)
[8] Sun 16th 09:44am SCCA Race Report: Grattan Good Times Nat. - Anything but...
(Matt Brannon)
[10] Fri 14th 05:36pm Water pump cavitation and modifications
(Marc Frost)
[2] Wed 12th 10:35am I have again adjustable cam pulleys for sale.
(Marko)
[5] Mon 10th 10:45am VIR Race Report
(Jim Scurria (Norfolk. VA))
[14] Sun 9th 06:35pm How hot is too hot?
(Marc Frost)
[3] Sun 9th 01:25pm Steve's New Car
(Corey Pettett)
[2] Fri 7th 03:46am SCCA rule book request
(Dwight Varnes, Elizabethtown, PA)
[4] Wed 5th 04:16pm Detroit auto X school results...
(John Lagerquist [ Commerce, MI ])
[2] Wed 5th 11:02am GP X PARTS?
(JAY)
[5] Tue 4th 11:26pm What to strip in prepared?
(Daniel Wilson)
[3] Tue 4th 05:36am Brian Hooper's ITC X1/9 will race at VIR this weekend.
(RacerRuss)
[3] Mon 3rd 11:17pm first seat time since OR03
(Courtney Waters)
[11] Mon 3rd 04:35pm Roebling success, heading to VIR ...
(RacerRuss)
[5] Sun 2nd 07:32pm Race Report -Finally- (SE-DIV Championship #1)
(Steve Hoelscher (Huntsville, Alabama))
[1] Sun 2nd 06:54pm New race car is here.....
(Steve Cecchele)
[4] Sat 1st 06:23pm Great (?) ebay Fiat motor home/ tow rig, etc.......
(Daniel Wilson)
[5] Wed 28th 08:38am Oregon2004 page is up
(Mark Scholz (Portland, Oregon))
[10] Mon 26th 07:44pm SCCA National Club Race Report: Gingerman Raceway
(Matt Brannon)
[2] Mon 26th 12:29pm First Auto Cross of the 2004 Season
(Andy Jossy (Medford, Oregon))
[1] Mon 26th 07:35am 131 rallycar for sale in pieces.
(Marko)
[2] Mon 26th 05:31am Hey testing 123
(BILL DISCHER)
[1] Sun 18th 08:58pm Gingerman Raceway National,
(Matt Brannon)
[9] Sun 18th 01:56pm Diamond wheels and Solo 2, and Steve
(Daniel Wilson)
[3] Sat 17th 12:17am Differences between Koni inserts and Koni struts?
(Ulix Goettsch (Stuttgart, Germany))
[3] Wed 14th 07:16pm Stainless Steel Brake Hoses
(Paul Irving)
[2] Tue 13th 09:44am More on spring rates & some good news
(Julian Brown)
[2] Sun 11th 09:06pm New 'X' Camshafts.
(Eric Armstrong)
[13] Sat 10th 10:07am DCNF Float Bowl Orientation
(Jim Scurria (Norfolk. VA))
[5] Wed 7th 05:41pm Rear sway bar mod. (yugo)
(Jon Ranney)
[14] Wed 7th 03:23pm X1/9 Splitter
(Paul Irving)
[1] Wed 7th 03:53am New racecar is almost here...
(Steve Cecchele)
[3] Tue 6th 04:20pm SCCA suspends Kumho ECSTA V710 from eligibility
(George Emery (Oregon))
[1] Tue 6th 04:39am Kumho ECSTA V710: RECALL
(Will Holding)
[5] Mon 5th 07:19pm Solo 11 clasification please?
(Daniel Wilson)
[2] Mon 5th 11:40am big valves needed
(carlo)
[1] Fri 2nd 05:07am Race Report Event 1 2004
(Scott O'Brien (out of my mind))
[9] Wed 31st 10:49am circuit racing suspension
(Marko)
[10] Tue 30th 04:50pm Racecar update
(Scott Phelps)
[3] Tue 30th 09:17am Air Horn Impact on Carb Vortex
(Jim Scurria (Norfolk. VA))
[5] Mon 29th 12:08pm Has anyone cc'd a PBS Yugo BV head?
(Ulix Goettsch (Stuttgart, Germany))
[16] Mon 29th 11:32am Smacking sound at Salem Autocross
(Mark Scholz (Portland, Oregon))
[4] Sun 28th 05:59pm Followup on Intake Manifold Design (was 1.25" adapter plate)
(Steve Hoelscher (Huntsville, Alabama))
[1] Sun 28th 05:08am So you thing Strada's are a pedestrian car.....
(Steve Cecchele)
[1] Sat 27th 09:01am Water Pump Choice
(Jim Scurria (Norfolk. VA))
[3] Sat 27th 05:40am Spring Rates - fast help needed!
(Julian Brown)
[2] Fri 26th 02:34pm Stock cams and valve lash (Q for the 2 Steves?)
(George Emery (Oregon))
[4] Fri 26th 12:04pm Shameless plug...(shock dyno)
(John Lagerquist [ Commerce, MI ])
[8] Thu 25th 07:31am X19/128 engine build (long as usual ;-)
(Steve Cecchele)
[1] Thu 25th 05:23am SCCA'ers Check out May FastTrack for shock rule change
(Matt Brannon)
[9] Tue 23rd 09:57pm Falken Azenis
(Warren Horbachewski)
[1] Tue 23rd 05:24pm RACE A FIAT!!!!!!!!
(Scott Matre)
[7] Tue 23rd 12:32pm Spring rates and 131/Bravas
(George Emery (Oregon))
[5] Tue 23rd 06:18am More about X struts; - the saga continues and a new angle
(Matt Brannon)
[1] Sun 21st 07:13pm Found the oil leak.
(Eric Armstrong)
[2] Sun 21st 10:25am Weber DCNF Jetting
(Marc Frost)
[1] Sun 21st 10:13am Racing Season Officially Begins When...
(Marc Frost)
[4] Sun 21st 07:06am New Specs for Fiats.....need help
(Jim Scurria (Norfolk. VA))
[17] Sat 20th 10:47pm Uno Turbo - Done.
(Eric Armstrong)
[12] Sat 20th 12:55pm 1.25" Carb Adapter Plate
(Jim Scurria (Norfolk. VA))
[1] Tue 16th 06:28pm FOR SALE 1500 cc X-19 bare head
(ron norton)
[5] Mon 15th 10:18pm Finally, the Uno Turbo is done.
(Eric Armstrong)
[12] Sun 14th 01:09pm LSD for X1/9 5 speed
(Steve Hoelscher (Huntsville, Alabama))
[5] Sat 13th 11:26pm nifty X or 128 camber adjuster...opinion?
(Mike Richmond)
[3] Tue 9th 04:09pm Brief race report (NFC) ...
(RacerRuss)
[7] Tue 9th 04:15am Coilover spring rates for street/track use (LFC)
(Dwight Varnes, Elizabethtown, PA)
[2] Mon 8th 10:48am Race Report - Eugene Icebreaker
(Dean Rees)
[3] Tue 2nd 04:00pm Scales. Any advice?
(Matt Ruiz)
[1] Tue 2nd 09:30am My Yugo for sale
(Chris Hartman)
[20] Thu 26th 09:00am Mounting shoulder harness...question
(CARL FRIEDMAN)
[3] Wed 25th 06:22pm The great Uno Turbo Conversion.
(Eric Armstrong)
[2] Sun 22nd 09:05pm Set your wayback machine- Migration complete!
(Eli Caul)
[26] Tue 17th 10:48am Performance X struts; - Konis not worth the $$??
(Matt Brannon)
[5] Sun 15th 06:12pm Race Report!! Ice Time Trials, Mallets Bay, Vermont
(Scott Phelps)
[2] Sun 15th 05:29pm Advice on auto-cross anyone?
(Daniel Wilson)
[11] Sun 15th 11:40am putting a 128 on a diet....
(Phil Grey (N.Z.))
[3] Thu 12th 03:34pm Race weekend
(Jon Ranney)
[9] Wed 11th 11:24pm X1/9 Radiator Info Request
(Paul Irving)
[6] Tue 10th 05:55am Off to Australia
(Dave Boling)
[14] Tue 10th 05:17am X1/9 @ Atlanta Pro Solo
(Corey Pettett)
[1] Thu 5th 07:27pm Paging Matt Brannon
(Steve Hoelscher (Huntsville, Alabama))
[2] Wed 28th 09:25pm For all you Spider racers....
(Mark Plaia (Santa Cruz, CA))
[5] Tue 27th 06:28pm X roll bar?
(Robert McNabb (Blue Ridge Mountains, Virginia))
[1] Tue 27th 04:40pm another engine management system
(Courtney Waters)
[10] Mon 26th 03:08pm Race report!!
(Jon Ranney)
[24] Sun 25th 09:17am Uno Turbo Tranny.
(Eric Armstrong)
[6] Fri 23rd 11:14pm Revolution wheels
(Fiat124Coupe)
[3] Mon 19th 07:04pm Race Report? Rally racing, Ice Time Trials
(Scott Phelps)
[20] Fri 16th 02:48pm DFI: what to do before putting the engine back together?
(Daniel Forest)
[5] Wed 14th 09:14am 850 in hill climb action
(Dwight Varnes, Elizabethtown, PA)
[5] Tue 13th 05:17pm need alignment specs for X
(iambhooper)
[17] Tue 13th 06:35am Dave S - You're in the (racing) movies!
(Matt Brannon)
[12] Mon 12th 07:06pm Miscellaneous Winter ramblings...... SFC racing? whut?
(Scott Phelps)
[8] Sun 11th 10:33am Speaking of SM2...
(George Emery (Oregon))
[8] Fri 9th 10:16am Jes curious (nfc)
(Robert McNabb (Blue Ridge Mountains, Virginia))
[2] Fri 9th 09:56am Easy camber adjustment with Monroe Easy Camber ?
(Ulix Goettsch (Stuttgart, Germany))
[4] Mon 5th 07:52pm Aluminum Flywheel for DOHC
(SterlingS)
[1] Mon 5th 09:47am MYAbarth On Line Gallery
(Qba)
[5] Sat 3rd 02:05pm SOHC Piston to head clearance?
(Mark Freeman (Newcastle, WA))
[10] Fri 2nd 05:40pm Check This Out!
(Steve Hoelscher (Huntsville, Alabama))
Page last updated Tue 15th Feb 2005 17:13:30.Processing time 3.7807838916779 seconds for 236 items. q1 time was 1.67 q2 time was 1.77
